Flash ESP8266

1. Open esp_duck/esp_duck.ino with the Arduino IDE.
2. Under Tools > Board in the WiFi Duck ESP8266 section, select your board. For example NodeMCU 1.0 (ESP-12E Module).
3. Connect the ESP8266 board via USB and select its port under Tools > Port.
4. Press Upload.

Pro Tip: If the ESP8266 is already running this software and you just want to update it, you don’t have to connect it via USB. You can update it over the air! Simply connect to the Wi-Fi network its hosting (default SSID and password is wifiduck).
In Arduino under Tools > Port you should now see a network port. Select it and press Upload.

Note: It can take a minute until the device is ready. After the initial flashing, the ESP8266 has to format its memory.

If you connected the RGB LED:

• Blue LED = Connection working
• Green LED = Device ready